User Contributed                                            MET/CAL Procedure
=============================================================================
INSTRUMENT:            Endevco 2740B:Shock Amplifier
DATE:                  11-Sep-97
AUTHOR:                User Contributed      
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       23
NUMBER OF LINES:       235
CONFIGURATION:         Fluke 5700A
CONFIGURATION:         HP 34401A
STANDARD:              DTB 1000pF
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P             M              F        W
  1.002  ASK+                                          X
  1.003  STD          DTB 1000pF
  1.004  HEAD         INITIAL CONDITIONS
  1.005  HEAD         {* Full Scale Range Tests *}
  1.006  JMP          2.001
  1.007  EVAL
  2.001  DISP         Set the UUT as follows:
  2.001  DISP         SENSITIVITY dial ................... 1.00
  2.001  DISP         SENSITIVITY switch ................. 1-10
  2.001  DISP         FULL SCALE ......................... 15
  2.001  DISP         LOW FREQ RESP ...................... 1
  2.001  DISP         HIGH FREQ RESP ..................... 1
  2.002  DISP         Set the UUT as follows:
  2.002  DISP         OPTION/NORM switch.................. NORM
  2.002  DISP         FLOAT/COM switch ................... COMMON
  2.002  DISP         STATIC/NORM switch ................. NORM
  2.002  DISP         INVERT/NORM switch ................. NORM
  2.002  DISP         CAL/OPER switch .................... OPER
  2.003  DISP         Connect the 5700A V ohm A HI/LO output to the UUT
  2.003  DISP         microdot input connector, via the 1000pF capacitor.
  2.004  DISP         Connect the 34401A Hi/Lo input to the UUT STD OUTPUT.
  2.005  IEEE         [@34401]FUNC "VOLT:AC"
  2.006  5700         10.6mV                       100H           O     S  2W
  2.007  HEAD         Please Wait ... Long Settling Time
  2.008  IEEE         [@34401][D30000]READ?[T0][I]
  2.009  ACC    10    7.0700V        0.06% 0.03/
  2.010  HEAD         Full Scale Range Tests
  2.011  MEME
  2.012  MEMC         V              1.500%        15pc/G
#!          Test Tol 0.10605, Sys Tol 0.007242, TUR 14.6437 (>= 4.00).
  3.001  IEEE         [@34401]FUNC "VOLT:AC"
  3.002  DISP         Set the UUT FULL SCALE switch to 50.
  3.003  5700         35.35mV                      100H                 S  2W
  3.004  HEAD         Please Wait ... Long Settling Time
  3.005  IEEE         [@34401][D30000]READ?[T0][I]
  3.006  HEAD         Full Scale Range Tests
  3.007  ACC    10    7.0700V        0.06% 0.03/
  3.008  MEME
  3.009  MEMC         V              1.500%        50pc/G
#!          Test Tol 0.10605, Sys Tol 0.007242, TUR 14.6437 (>= 4.00).
  4.001  IEEE         [@34401]FUNC "VOLT:AC"
  4.002  DISP         Set the UUT FULL SCALE switch to 150.
  4.003  5700         106.1mV                      100H                 S  2W
  4.004  HEAD         Please Wait ... Long Settling Time
  4.005  IEEE         [@34401][D30000]READ?[T0][I]
  4.006  HEAD         Full Scale Range Tests
  4.007  ACC    10    7.0700V        0.06% 0.03/
  4.008  MEME
  4.009  MEMC         V              1.500%        150pc/G
#!          Test Tol 0.10605, Sys Tol 0.007242, TUR 14.6437 (>= 4.00).
  5.001  IEEE         [@34401]FUNC "VOLT:AC"
  5.002  DISP         Set the UUT FULL SCALE switch to 500.
  5.003  5700         353.5mV                      100H                 S  2W
  5.004  HEAD         Please Wait ... Long Settling Time
  5.005  IEEE         [@34401][D30000]READ?[T0][I]
  5.006  HEAD         Full Scale Range Tests
  5.007  ACC    10    7.0700V        0.06% 0.03/
  5.008  MEME
  5.009  MEMC         V              1.500%        500pc/G
#!          Test Tol 0.10605, Sys Tol 0.007242, TUR 14.6437 (>= 4.00).
  6.001  IEEE         [@34401]FUNC "VOLT:AC"
  6.002  DISP         Set the UUT FULL SCALE switch to 1.5K.
  6.003  5700         1.061V                       100H                 S  2W
  6.004  HEAD         Please Wait ... Long Settling Time
  6.005  IEEE         [@34401][D30000]READ?[T0][I]
  6.006  HEAD         Full Scale Range Tests
  6.007  ACC    10    7.0700V        0.06% 0.03/
  6.008  MEME
  6.009  MEMC         V              1.500%        1500pc/G
#!          Test Tol 0.10605, Sys Tol 0.007242, TUR 14.6437 (>= 4.00).
  7.001  IEEE         [@34401]FUNC "VOLT:AC"
  7.002  DISP         Set the UUT FULL SCALE switch to 5K.
  7.003  5700         3.535V                       100H                 S  2W
  7.004  HEAD         Please Wait ... Long Settling Time
  7.005  IEEE         [@34401][D30000]READ?[T0][I]
  7.006  HEAD         Full Scale Range Tests
  7.007  ACC    10    7.0700V        0.06% 0.03/
  7.008  MEME
  7.009  MEMC         V              1.500%        5000pc/G
#!          Test Tol 0.10605, Sys Tol 0.007242, TUR 14.6437 (>= 4.00).
  8.001  HEAD         {* Sensitivity Dial Test *}
  8.002  DISP         Set the UUT FULL SCALE switch to 150.
  8.003  JMP          9.002
  8.004  EVAL
  9.001  DISP         Reset the UUT FULL SCALE switch to 150 and the
  9.001  DISP         SENSITIVITY dial to 1.0
  9.002  IEEE         [@34401]FUNC "VOLT:AC"
  9.003  5700         106.1mV                      100H                 S  2W
  9.004  HEAD         Please Wait ... Long Settling Time
  9.005  IEEE         [@34401][D30000]READ?[T0][I]
  9.006  HEAD         Sensitivity Dial Test
  9.007  MEME                                                     >1
  9.008  DISP         Set the UUT as follows:
  9.008  DISP         SENSITIVITY dial ................... 10.0
  9.008  DISP         FULL SCALE ......................... 15
  9.009  HEAD         Please Wait ... Long Settling Time
  9.010  IEEE         [@34401][D30000]READ?[T0][I]
  9.011  HEAD         Sensitivity Dial Test
  9.012  ACC    10    7.0700V        0.06% 0.03/
  9.013  MEME
  9.014  MEME                                                     <1
  9.015  MEMC         V              3.000%
#!          Test Tol 0.2121, Sys Tol 0.007242, TUR 29.2875 (>= 4.00).
 10.001  HEAD         {* Residual Noise Test *}
 10.002  JMP          11.001
 10.003  EVAL
 11.001  DISP         Set the UUT as follows:
 11.001  DISP         SENSITIVITY dial ................... 1.00
 11.002  IEEE         [@34401]FUNC "VOLT:AC"
 11.003  DISP         Disconnect the UUT from the 5700.
 11.004  DISP         Short the input to the 1000pF capacitor.
 11.005  HEAD         Please Wait ... Long Settling Time
 11.006  IEEE         [@34401][D30000]READ?[T0][I]
 11.007  HEAD         Residual Noise Test
 11.008  MATH         MEM1 = 0
 11.009  MEME
 11.010  MEMC         Vrms           -0U +0.0233U
#! T.U.R. not calculated because System Uncertainty not available.
 12.001  HEAD         {* Calibration Output Test *}
 12.002  JMP          13.001
 12.003  EVAL
 13.001  IEEE         [@34401]FUNC "VOLT:AC"
 13.002  DISP         Set the UUT CAL/OPER switch to CAL.
 13.003  DISP         Reconnect the UUT to the 5700.
 13.004  IEEE         [@34401]READ?[D5000][I]
 13.005  ACC    10    3.535V         0.06% 0.03/
 13.006  MEME
 13.007  MEMC         V              1.00%
#!          Test Tol 0.03535, Sys Tol 0.005121, TUR 6.9029 (>= 4.00).
 14.001  DISP         Set the UUT CAL/OPER switch to OPER.
 14.002  HEAD         {* Frequency Response Test *}
 14.003  JMP          15.001
 14.004  EVAL
 15.001  IEEE         [@34401]FUNC "VOLT:AC"
 15.002  DISP         Set the UUT FULL SCALE switch to 15.
 15.003  JMP          16.002
 15.004  EVAL
 16.001  DISP         Reset the LOW FREQ RESO switch to 1.
 16.002  ASK-                              U
 16.003  5700         10.6mV                       100H           O     S  2W
 16.004  HEAD         Please Wait ... Long Settling Time
 16.005  IEEE         [@34401][D30000]READ?[T0][I]
 16.006  HEAD         Frequency Response Test
 16.007  MEME                                                     >1
 16.008  IEEE         [@34401]DET:BAND 3
 16.009  5700         10.6mV                       10.15H         O     S  2W
 16.010  DISP         Set the UUT LOW FREQ RESP to 3.
 16.011  HEAD         Please Wait ... Long Settling Time
 16.012  IEEE         [@34401][D30000]READ?[T0][I]
 16.013  HEAD         Frequency Response Test
 16.014  MEME
 16.015  MEME                                                     <1
 16.016  MEMC         V              5.00%         10H
#!          Test Tol 0.00053, Sys Tol 1.183e-005, TUR 44.8014 (>= 4.00).
 17.001  IEEE         [@34401]FUNC "VOLT:AC"
 17.002  IEEE         [@34401]DET:BAND 20
 17.003  5700         10.6mV                       150kH          O     S  2W
 17.004  DISP         Set the UUT LOW FREQ RESP to 1.
 17.005  HEAD         Please Wait ... Long Settling Time
 17.006  IEEE         [@34401][D30000]READ?[T0][I]
 17.007  HEAD         Frequency Response Test
 17.008  MEME
 17.009  MEME                                                     <1
 17.010  MEMC         V              -3.50% +0U    150kH
#!          Test Tol 0.000371, Sys Tol 2.772e-005, TUR 13.3838 (>= 4.00).
 18.001  IEEE         [@34401]FUNC "VOLT:AC"
 18.002  5700         10.6mV                       100kH          O     S  2W
 18.003  HEAD         Please Wait ... Long Settling Time
 18.004  IEEE         [@34401][D30000]READ?[T0][I]
 18.005  HEAD         Frequency Response Test
 18.006  MEME
 18.007  MEME                                                     <1
 18.008  MEMC         V              5.00%         100kH
#!          Test Tol 0.00053, Sys Tol 1.754e-005, TUR 30.2166 (>= 4.00).
 19.001  IEEE         [@34401]FUNC "VOLT:AC"
 19.002  DISP         Set the UUT HIGH FREQ RESP to 2.
 19.003  5700         10.6mV                       10kH           O     S  2W
 19.004  HEAD         Please Wait ... Long Settling Time
 19.005  IEEE         [@34401][D30000]READ?[T0][I]
 19.006  HEAD         Frequency Response Test
 19.007  MEME
 19.008  MEME                                                     <1
 19.009  MATH         MEM = MEM - (MEM * .1)
 19.010  MEMC         V              +0U -100.00%  10kH
#!          Test Tol 0.0106, Sys Tol 7.166e-006, TUR 1479.21 (>= 4.00).
 20.001  IEEE         [@34401]FUNC "VOLT:AC"
 20.002  5700         10.6mV                       5kH            O     S  2W
 20.003  HEAD         Please Wait ... Long Settling Time
 20.004  IEEE         [@34401][D30000]READ?[T0][I]
 20.005  HEAD         Frequency Response Test
 20.006  MEME
 20.007  MEME                                                     <1
 20.008  MEMC         V              5.00%         5kH
#!          Test Tol 0.00053, Sys Tol 7.166e-006, TUR 73.9604 (>= 4.00).
 21.001  IEEE         [@34401]FUNC "VOLT:AC"
 21.002  DISP         Set the UUT HIGH FREQ RESP to 3.
 21.003  5700         10.6mV                       5kH            O     S  2W
 21.004  HEAD         Please Wait ... Long Settling Time
 21.005  IEEE         [@34401][D30000]READ?[T0][I]
 21.006  HEAD         Frequency Response Test
 21.007  MEME
 21.008  MEME                                                     <1
 21.009  MATH         MEM = MEM - (MEM * .2)
 21.010  MEMC         V              +0U -100.00%  5kH
#!          Test Tol 0.0106, Sys Tol 7.166e-006, TUR 1479.21 (>= 4.00).
 22.001  IEEE         [@34401]FUNC "VOLT:AC"
 22.002  5700         10.6mV                       2kH            O     S  2W
 22.003  HEAD         Please Wait ... Long Settling Time
 22.004  IEEE         [@34401][D30000]READ?[T0][I]
 22.005  HEAD         Frequency Response Test
 22.006  MEME
 22.007  MEME                                                     <1
 22.008  MEMC         V              5.00%         2kH
#!          Test Tol 0.00053, Sys Tol 7.166e-006, TUR 73.9604 (>= 4.00).
 23.001  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  1
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.